Close

Pedestrian Crossing Traffic Signal Push button with Countdown Timer

23,100.00$

MTP Launch Pedestrian Crossing Traffic Signal Push button with Countdown Timer system which will help in better control of traffic.

Countdown timers at red lights would inform drivers how much time remained before the light turned green, while timers at green lights would tell drivers how much time was left before the light turned red.

MTP Pedestrian countdown timer shows how long pedestrian must be wait behind of the pedestrian signal to getting green light for passing cross walking area. usually pedestrian must be wait around of 8 to 60 seconds after pushing the push button, and  it load tension to pedestrian because of unknown waiting time. 

MTP Pedestrian countdown timer prevent pedestrian tension cause of unknown waiting time behind of red pedestrian signal with Red countdown timer.

MTP Pedestrian countdown timer has Green countdown timer too which allows to pedestrians decide if they have enough time to cross the road or not.

With all of this in mind, MTP created a Digital Pedestrian Countdown Timer system that lets passers-by see how many seconds the signal will turn Red and how many seconds it will turn green.

These pedestrian signals have digital timers that display how many seconds pedestrians have to wait and how much time have for crossing the road.

Pedestrian Signal with Push Button with Countdown Timer Data Sheet

Here is some sample videos for your reference,

Pedestrian Signal with Push Button with Countdown Timer Sample Video 1

Pedestrian Signal with Push Button with Countdown Timer Sample Video 2

Pedestrian Signal with Push Button with Countdown Timer Sample Video 3

To Order this product or any other so please Contact us and please follow our social media platforms FacebookInstagramLinkedInTwitterYouTube, for any future updates or queries.

Description

MTP Pedestrian Crossing Traffic Signal Push button with Countdown Timer

MTP Produce Solar Traffic Pedestrian Signs according to customer requested design, this parameter is one of the best options we offer, you can have your customized Traffic Pedestrian Signal with Push Button.

What is this Platform Exactly?

MTP Launch Pedestrian Crossing Traffic Signal Push button with Countdown Timer system which will help in better control of traffic.

Countdown timers at red lights would inform drivers how much time remained before the light turned green, while timers at green lights would tell drivers how much time was left before the light turned red.

MTP Pedestrian countdown timer shows how long pedestrian must be wait behind of the pedestrian signal to getting green light for passing cross walking area. usually pedestrian must be wait around of 8 to 60 seconds after pushing the push button, and  it load tension to pedestrian because of unknown waiting time. 

MTP Pedestrian countdown timer prevent pedestrian tension cause of unknown waiting time behind of red pedestrian signal with Red countdown timer.

MTP Pedestrian countdown timer has Green countdown timer too which allows to pedestrians decide if they have enough time to cross the road or not.

With all of this in mind, MTP created a Digital Pedestrian Countdown Timer system that lets passers-by see how many seconds the signal will turn Red and how many seconds it will turn green.

These pedestrian signals have digital timers that display how many seconds pedestrians have to wait and how much time have for crossing the road.

                                                                                                                                               

 

Advantages

  • Pedestrian will look at the countdown timer to understand he can cross the road or not
  • Pedestrians feel less rushed when waiting for open cross walking area
  • Pedestrians feel less rushed when crossing the road
  • Gives more confidence to mobility impaired pedestrians, who may cross more slowly
  • Pedestrians who didn’t notice a green man signal can decide if they have enough time to cross the road or not
  • Pedestrian Crossing Traffic Signal can reduce the number of accidents on roads like pedestrian accident and right-angle collision of two cars
  • This kind of traffic pedestrian signal is used in the crossing area. It is powered by a solar panel, so it doesn’t need the city electricity line, so no have any electricity bill, it is free of charge for monthly electricity consumption.
  • Its installation is very simple and no need for any cabling from the electricity line, because it’s powered by solar panels, 
  • MTP Pedestrian no need any extra signal controller so its cost also saved  

Effectiveness

Public opinion,

  • We feel safe because of these timers,” Pedestrian said. “Accidents could be avoided if timers were installed at traffic signals.
  • Pedestrian countdown signals are well liked by pedestrians, especially those that are mobility impaired.
  • Mobility Impaired people and children prefer crossings with Pedestrian countdown timers compared to those without timers.
  • Pedestrians felt much safer when using a pedestrian countdown signal, and they also felt less rushed when crossing the road.

Vehicles

  • The system can allow for less green man time to pedestrians, which can then be re-allocated to motor vehicles, it mean without pedestrian signal on rush area peoples give not way to vehicle because always a new person start crossing the road. But pedestrian signal give limited time to pedestrian and open road for vehicle.    

Explanation,

Technical Properties of Wireless Solar Traffic Signal,

1.Quality of Parts

The quality of all parts of the signal is from finest materials of polycarbonate. Also, the color of body box is special for this kind of work has following technical properties,

  • Melting point: 485 ̊c
  • Degree of heat in glass removing: 150 ̊c
  • Shock strength: 12kg cm
  • Tensile resistance: 59kg cm2

2. Size of its body,

Solar Traffic Signal with dimension

Solar Pedestrian with dimension

3. Full mask of Flashing Light,

The diameter of full mask is 330mm in top side and in the point of its connection into main body; this mask has the 300 mm diameter with depth of 215mm. This connection is done by screw, being put on the body.

4. Half mask,

The height of this mask is 185mm in outside of the body and its width is considered 230mm in the place of its connection with main body. This is done by a screw, being put on the body.

5. Door,

Door shall be fastening on the body, in a shape toggle. Also, it has a rubber for the purpose of insulation.

Casing of traffic Signal

6. Casing,

6.1: Casing,

Casing of traffic signal is made with high quality polycarbonate, being suitable for traffic signal.

6.2: Lenses,

External lenses made with grid polycarbonate, to being suitable for lens.

LED Casing

6.3: LED Module,

LED’s are identified very well and amount of their desired life is 100.000 hours in lawful range for traffic light and traffic signals and its light intensity is 8000mcd.

Total numbers of LEDs in one module are equal to 110pcs.

LED

LEDs module and its power supply is surely put on casing. Then insulated rubber is installed on the body, so there shall be no probabilities for entering water, damp and dust into electronically set.

External lens is used for correcting light diffusion. Also, it is responsible for protecting the set, so that it protects electronically set and filter from damages, resulting from strong shock
(stone) or burning, as a result of throwing pyrotechnics parts. These shocks shall be cause of damaging external lens.
Changing and replacing external lens is easily possible by a worker.

7. Batteries,

Sealed Lead Acid batteries of 12v, 36Ah, having desired life of 5 years.

Sealed Lead Acid Battery

8. Solar Panels,

Each set Pedestrian Signal has a 60W, 18v, 3.66A solar panel with the efficiency of %16.
Each solar panel has a cable, having 2 blue & black wires. After installation, cable is entered into controller box then, it connects to its terminal.

Note in our old system that blue wire shall be connected to blue wire of terminal and black wire into black wire of terminal.

Solar Panel(60watt)

9. Charge Controller,

  • Measuring voltage of battery, solar panel, charge current and related measuring.
  • Displaying voltage of solar panel, voltage of battery, over voltage cut off charge and low voltage cut.
  • Prevent overcharge with cut off solar panel.
  • Load cutting while voltage of battery dropping to minimum level of acceptable voltage for battery.
  • Working time, without any charge and with full battery is almost 14 days.
  • Charging time for empty battery is 24 hours in light, in case of performing operation, and 18 hours without any operation.

Charge Controller

10. Intelligent Microcontroller System,

  • Getting data from Wireless Receiver and apply it to three color signal and Pedestrian.
  • Light Regulation and optimization of consumption, according to charge current (environmental light) and battery voltage and solar panel.
  • Neutralizing effects of battery voltage in light illumination of flashing light.
  • Maximum exited rates (day) into its minimum (night) is 5 to 1 and (it is changeable, on the basis of order).
  • Using modulation of PWM for changing light illumination.

Controller Box

11. Push Button,

Push Button is made by aluminum with electrostatic powder coating color. It has one push button switch and 4pcs LED indicator, After pushing this button, one internal timer will start counting down and
LED indicator will blink.
Once internal countdown timer reach to zero, vehicle signal will going to red and pedestrian signal going to green.

Push Button

12. Brackets,

Each Signal light has a pairs of holder for connecting main body to its pole, called Bracket. For this installation, at first, Brackets are faster on the main body, then Signal light will installed on its pole by 2pcs of hose clips.

Brackets

13. Round Clamp(Hose Clips),

Seven round clamp is attached to one set of pedestrian signal.
3pcs for fixing 3color signal (vehicle signal) and two color signal(pedestrian signal), 2pcs for fixing solar panel and 2pcs for fixing Push Button Box on the pole.

Hose Clip

14. Post,

Hot Galvanized with 3.3m length and 11.5cm diameter and 4mm wall thickness, with Electrostatic Powder Coating Color.

Post

Technical Specification

  • Solar Power: 50 Watts, Life time more than 20 years
  • Battery: Internal 12 volt, 36 Ah, sealed lead acid
  • LED Life: More than 100,000 Hours
  • Light luminous: 8000mcd 
  • Light Intensity: Automatic regulation light intensity in day and night(day intensity 5 times night) with microcontroller 
  • Wireless Transmitter and Receiver: 433 MHz
  • Covered Area: 300m diameter
  • Working time after full charge: 4 days
  • Working time in cloudy weather: 8 days 
  • Visible Distance: More than 1000m
  • Angle: 100 Degree 
  • Operating Temperature: -20° C to 75° C
  • Waterproof: IP65

Solar Panels would not damage the Environment,

This product is developed by MTP talented engineers. It uses solar energy to generate its power and does not need electricity cables. based on this facility MTP Pedestrian Crossing Traffic Signal Push button with Countdown Timer can be regarded as a green and ecosystem-friendly product. Using green energies like solar power will cause a decrease in greenhouse gasses. it causes a decrease in environmental temperature.

Useful Points,

MTP is a manufacturer of Traffic Products and Smart Traffic Cameras & Radars.

To Order this product or any other so please Contact us and please follow our social media platforms FacebookInstagramLinkedInTwitterYouTube, for any future updates or queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

bitcoin mixerbitcoin tumblerbest bitcoin mixer