Description

MTP Crosswalk LED  Single Color Road Stud

Crosswalk LED road stud is a type of road safety device designed to enhance visibility and safety at pedestrian crossings. These studs are embedded in the road surface and feature LED lights that illuminate when activated, typically triggered by a pedestrian pressing a button or by sensing pedestrian movement. They help to clearly delineate crosswalk boundaries, especially in low-light conditions or at night, thereby improving visibility for both pedestrians and drivers and reducing the risk of accidents.

Structure

Power Supply Board(MTP Brand)

KEY FEATURES:

• Connectable to all kinds of Traffic Signal Controller,
•  Input Ac 220v or Solar Panel
•  Output Dc 12v,

Control board

Installation Guide

Twelve Steps to Installation:

1. Determine the area and install the isolation facilities.
2. Create all necessary holes with diameter of 130mm and depth of 50mm.
3. Open a connection between holes with 25mm width and 45mm depth for cabling.
4. Dry the hole with blowtorch and clean the structure.

Installation guide

1. Connect LED road stud and put the cable inside the insulation protective tube then pour glue into the created holes and seal the tube firmly.
2. Carefully place the LED road stud inside the created holes
3. 9. Clean excess glue.
4. 10. Inspect within two hours after installation to ensure that all road studs are leveled and not loaded askew.
5. 11. Connect cable to signal controller.

 

Environmentally Friendly,

It doesn’t require electrical lines because it generates power using solar energy. This facility suggests that the MTP Products is an environmentally friendly and green product. It results in a decrease in the outside temperature.

Useful Points,

MTP is a manufacturer of Traffic Products, Traffic Cameras & Radars.

MTP offers you a wide range of Traffic-Related Products, One stop solution for engineering, electrical, electronic, and technological needs,

You can see Traffic Enforcement Cameras here on Wikipedia.