Description

Synchronized Cross walking Solar Road Stud (Ultra-flat)

We manufactured our LED road stud that can be wirelessly synchronized with a sideways flashing light signal. It does not require any wiring so it is easy to install.

Structure

Controller (MTP Brand)

• Can be synchronized wirelessly with Flashing Light Signal.
• Capable of functioning as a stand-alone system.
• Capable of functioning as a group system in one junction.
• Adjustable LED flashing rate.
• Low power consumption.
• Solar-powered system.
• Compatible with all colored led (Red, Green, Yellow, or White).
• Automatic activation during nighttime.

 

Dimension

Diameter 110mm / Height 55mm

Installation Guide

Eleven Steps to Installation:

1. Before installation, isolate the work area with road barriers and make sure all safety rules are strictly followed,
2. Determine the location of installation, and then make holes,
3. Ensure the installation road is crack free and leveled,
4. Open the necessary holes with a diameter of 120mm, and a depth of 60mm,
5. Dry the hole with a blowtorch and clean all the structures,
6. Pour the glue into the road stud hole and seal the protective tube,
7. Put a Wireless solar road stud inside the hole,
8. Ensure they are at the right angle,
9. Excess glue must be cleaned and make sure that it does not cover the road stud,
10. Please check after two hours of installation and ensure that all of the Road studs are leveled and not loaded askew,
11. After six hours of installation please remove all isolations,

ROAD STUD FOR PEDESTRIAN CROSS-WALKING AREA

LED Road studs are very useful road safety products on the road and have powerful advantages. Solar road studs are powered by solar energy.

The solar road studs on the zebra crossing provide good visibility during nighttime or under foggy weather conditions. Drivers can learn about pedestrian traffic conditions in advance within a safe distance, and take avoidance measures.

Our road studs are cable-less and therefore easy and quick possibility makes pedestrians cross the road more safely. Road studs are also beneficial for humps especially at night as it would enable the driver to see the hump from a far and take action accordingly.

We manufactured our LED road stud that can be wirelessly synchronized with a sideways flashing light signal. It does not require any wiring so it is easy to install.

ROAD STUD FOR ROUNDABOUT

Roundabouts are proven to reduce the number of fatal collisions as compared to cross-junctions, but a side effect is that they can sometimes increase the total number of accidents due to the complexity of the layout. Sometimes the driver can struggle to interpret road markings and signs promptly and can lose lane discipline it is hoped the new studs will solve this problem.

Therefore, in order to overcome collision and lane transgression MTP introduces “ROUNDABOUT ROADSTUDS”, this road stud would increase visibility rate, making it easier for the driver to interpret the pathway through the roundabout. Furthermore, this road stud would also reduce the likelihood of traffic collisions.

The road stud light reflects with the car’s headlights. Curved area installation would increase visibility allowing the drivers to identify the curves from far, which would eventually increase driver safety.

Our road studs are equipped with wireless synchronization technology that enables all led to blink in a synchronized manner. This makes road studs very effective on roads that are poorly lit.

The road stud light reflects with the car’s headlights. Exit area installation would increase visibility allowing the drivers to identify the exit from far, which would eventually increase driver safety. Our road studs are equipped with wireless synchronization technology that enables all led to blink in a synchronized manner. This makes road studs very effective on roads that are poorly lit.

Technical Specification

Solar Panels would not damage the Environment,

This product is developed by MTP talented engineers. It uses solar energy to generate power and does not need electricity cables. based on this facility MTP Cross walking LED Solar Road Stud can be regarded as a green and ecosystem-friendly product. Using green energies like solar power will cause a decrease in greenhouse gases. it causes a decrease in environmental temperature.

Useful Points,

MTP is a manufacturer of Traffic Products and Smart Traffic Cameras & Radars.

MTP offers you a wide range of Traffic-Related Products, One stop solution for engineering, electrical, electronic, and technological needs,

To Order this product or any other so please Contact us and please follow our social media platforms Facebook, Instagram, LinkedIn, Twitter, and YouTube, for any future updates or queries.