Description

MTP Solar Pedestrian Traffic Signal with Push Button Single Mode

MTP Produce Solar Traffic Pedestrian Signs according to the customer’s requested design, this parameter is one of the best options we offer, you can have your customized Traffic Pedestrian Signal with Push Button.

What is this Platform Exactly?

MTP Launch Solar Pedestrian Traffic Signal with Push Button Single Mode system which will help in better control of traffic.

Each cross-walking area has two pairs of pedestrian signal posts, one pair for the going direction and one pair for the opposite direction.

In single mode push button signal, two pairs are not synchronized together and each pair works individually so a pedestrian who wants to cross the road need to press push button no 1 or 4 as below attach the image, and after reaching the middle of the road, just press button 3 or 2 to open opposite line for crossing.

Advantages,

• The indications of the signals can be seen easily in foggy weather or at night time. Without a signaling system, it is very difficult to control traffic by the traffic policeman at night or in foggy weather, or on a rainy day.
• They can reduce the number of accidents on roads like pedestrian accidents and right-angle collisions between two cars.
• The traffic signals help for the safe movement of slow-moving traffic by interrupting heavy traffic at regular intervals.
• Pedestrian Crossing Traffic Signals can increase the capacity of traffic handling at the intersection.
• Pedestrian Crossing Traffic Signals have a less environmental impact.
• Under favorable conditions, they provide for continuous motion of traffic along a specified path.
• Pedestrian Crossing Traffic Signals can reduce the number of accidents on roads like pedestrian accidents and right-angle collisions between two cars.
• This kind of traffic pedestrian signal is used in the crossing area.

Explanation,

Technical Properties of Wireless Solar Traffic Signal,

1. Quality of Parts

The quality of all parts of the signal is from the finest materials of polycarbonate. Also, the color of the body box is special for this kind of work and has the following technical properties,

• Melting point: 485 ̊c
• Degree of heat in glass removing: 150 ̊c
• Shock strength: 12kg cm
• Tensile resistance: 59kg cm2

2. Size of its body,

Solar Traffic Signal with dimension

Solar Pedestrian with dimension

3. Full mask of Flashing Light,

The diameter of the full mask is 330mm on the top side and at the point of its connection into the main body; this mask has a 300 mm diameter with a depth of 215mm. This connection is done by a screw, being put on the body.

4. Half mask,

The height of this mask is 185mm outside of the body and its width is considered 230mm in the place of its connection with the main body. This is done by a screw, being put on the body.

5. Door,

The door shall be fastened on the body, in a shape toggle. Also, it has rubber for the purpose of insulation.

The casing of the Traffic Signal

6. Casing,

6.1: Casing,

The casing of the traffic signal is made with high-quality polycarbonate, being suitable for the traffic signal.

6.2: Lenses,

External lenses are made with grid polycarbonate, to be suitable for lenses.

LED Casing

6.3: LED Module,

LEDs are identified very well and the amount of their desired life is 100.000 hours in lawful range for a traffic light and traffic signals and its light intensity is 8000mcd.

The total numbers of LEDs in one module are equal to 110 pcs.

LED

 

An external lens is used for correcting light diffusion.  These shocks shall be the cause of damaging the external lens.
Changing and replacing external lenses is easily possible for a worker.

7. Batteries,

Sealed Lead Acid batteries of 12v, 36Ah, having desired life of 5 years.

Sealed Lead Acid Battery

8. Solar Panels,

Each set Pedestrian Signal has a 60W, 18v, 3.66A solar panel with an efficiency of %16.
Each solar panel has a cable, having 2 blue & black wires.

Solar Panel(60watt)

9. Charge Controller,

• Measuring voltage of the battery, solar panel, charge current and related measuring.
• Displaying voltage of the solar panel, the voltage of the battery, over voltage cut off charge, and low voltage cut.
• Prevent overcharge with cut-off solar panels.
• Load cutting while the voltage of the battery drops to the minimum level of acceptable voltage for the battery.
• Working time, without any charge and with full battery is almost 14 days.
• Charging time for an empty battery is 24 hours in light, in case of performing the operation, and 18 hours without any operation.

Charge Controller

10. Intelligent Microcontroller System,

• Getting data from Wireless Receiver and applying it to three color signals and Pedestrian.
• Light Regulation and optimization of consumption, according to charge current (environmental light) and battery voltage and solar panel.
• Neutralizing effects of the battery voltage in light illumination of flashing light.
• Maximum exited rates (day) into its minimum (night) is 5 to 1 and (it is changeable, on the basis of order).
• Using modulation of PWM for changing light illumination.

Controller Box

11. Push Button,

It has one push button switch and 4pcs LED indicator, After pushing this button, one internal timer will start counting down and the LED indicator will blink.
Once the internal countdown timer reaches zero, the vehicle signal will go to red and the pedestrian signal going to green.

Push Button

12. Brackets,

Each Signal light has a pair of holders for connecting the main body to its pole, called a Bracket.

Brackets

13. Round Clamp(Hose Clips),

3pcs for fixing 3 color signals (vehicle signal) and two color signals (pedestrian signal), 2pcs for fixing the solar panel, and 2pcs for fixing Push Button Box on the pole.

Hose Clip

14. Post,

Hot Galvanized with 3.3m length and 11.5cm diameter and 4mm wall thickness, with Electrostatic Powder Coating Color.

Post

Technical Specification

• Dimension: 3 color signal: (355*1065*185mm) (2 color pedestrian: 355*710*185mm)  (Push Button: 200*300*50mm)
• Weight: (3 color signal:20Kg) (2 colors pedestrian:15kg) (Push Button: 1kg)
• Body Material: (3 color signal: Polycarbonate with Untie UV) (2 color pedestrian: Polycarbonate with Untie UV) (Push Button: Aluminum with electrostatic black color)
• Battery: Internal 12 volt, 36 Ah, sealed lead acid
• LED module for 3 color: (110pcs Red) (110pcs Yellow) (110pcs Green)
• LED module for Pedestrian: (45pcs Red) (45pcs Green)
• LED module for Push Button: 4pcs Yellow
• Covered Area: 300m diameter
• Working time after full charge: 4 days
• Working time in cloudy weather: 8 days
• Angle: 100 Degree
• Operating Temperature: -20° C to 75° C
• Waterproof: IP65

Environmentally Friendly,

This product is created by skilled engineers at MTP.It results in a decrease in the outside temperature.

Useful Points,

MTP is a manufacturer of Traffic Products and Smart Traffic Cameras & Radars.

MTP offers you a wide range of Traffic-Related Products, One stop solution for engineering, electrical, electronic, and technological needs,

To Order this product or any other so please Contact us and please follow our social media platforms Facebook, Instagram, LinkedIn, Twitter, and YouTube, for any future updates or queries.